Software/Firmware
Though the PrintSpace Altair printer is currently in the Simplify 3D menu, we have our own Profile Settings. After installing our setting...
Thu, Feb 23, 2017 at 4:00 PM
1. On the Altair's main screen(or select 'watch' from the menu) your Printer's IP address will be displayed.
2. Open your web bro...
Thu, Oct 27, 2016 at 4:28 PM
These instructions are only for restoring the Altair's software and settings to the date it was sent out.
Connect to Altair 3D Printer
...
Mon, Nov 7, 2016 at 4:59 PM
Re-Installing or Updating the Firmware on your Altair V1 or V2 Using the correct Firmware and Config When to update or Re-install Firmware...
Fri, Sep 9, 2022 at 10:49 PM