Routine Maintenance & Care
Viki Screen Button
Sometimes dirt or filament can get stuck in between the button and its walls. This can make using the button difficult to use....
Fri, Nov 18, 2016 at 10:37 PM
Your Altair will automatically set the bed height before each print to compensate for slight variations between prints (for example, if ...
Fri, Sep 23, 2016 at 11:17 AM
Calibrating Your Extruder
Signs Extruder Needs to be Calibrated:
If you extruder is not calibrated correctly it will cau...
Thu, Nov 17, 2016 at 7:15 PM
If you purchase a new NOVA Hot End nozzle after January of 2017 you will be receiving a new wiring harness as well with updated terminals that increase the ...
Mon, Sep 11, 2017 at 5:23 PM
The attached document will step you through the process of changing the pulleys on your Altair V1, V2, and V3 Carbon. You will need at least one 2.0 mm Alan...
Mon, Oct 9, 2017 at 10:02 PM