MatterControl
Installing and Setting Up MatterControl
Posted on Dec. 31, 2014 by MatterHackers
Original Guide Link
A brief guide to manag...
Fri, Aug 26, 2016 at 6:57 PM
After adding the Altair as a new 3D printer in Matter Control, It is recommended for all new users to download and import the default_printer_settings...
Fri, Nov 25, 2016 at 7:10 PM
How can I calculate the amount of filament and time required for Altair to complete a print?
You can view this in MatterControl software. Open MatterCon...
Sat, Apr 11, 2015 at 2:51 PM
As a rule of thumb the print time and the amount of material used in a print decreases by a factor of four if you scale the print down by half. C...
Fri, Aug 26, 2016 at 6:58 PM
For printing with new materials custom layer heights are sometimes needed to change how far the hot end nozzle sits above the bed for the first layer o...
Mon, Aug 8, 2016 at 3:53 PM
One of the simple things that you can do to make sure you have better prints is to calibrate the extruder on your printer. It only takes a minute but can ...
Fri, Aug 26, 2016 at 3:47 PM
Since each filament and print is just a little bit different sometimes it is necessary to change some of the settings that are preset in Matter Control. T...
Sat, Sep 3, 2016 at 4:39 PM