Altair 3 and Altair 3 Pro QuickStart Guide

Attached is a basic guide for setting up your printer. PrintSpace's support center is intended to give you a more comprehensive user guide. 

Here you will find the .FFF file you need to import to Simplify 3D(with directions). 

Here you will also find directions for how to update your firmware (in case you have any problems like these).

Keep checking the Support Center, as new updates to the firmware and Simplify 3D will be posted here. Articles are always being added that will enhance, and better you experience with the Altair V3.

IMPORTANT: Make sure you remove the FlexPlate before calibrating as indicated in the quickstart guide. 


Register your warranty